How to Install a Widespread Bathroom Faucet Like a Pro

Ready to upgrade your bathroom with a new faucet? Installing a widespread bathroom faucet may seem complicated, but it's actually a straightforward DIY project. With the right tools and this easy-to-follow guide, you'll have it installed in no time. Let's dive into the steps to install a widespread bathroom faucet like a pro!

What You’ll Need

Make sure you gather the following supplies before you start:

• Faucet body
• Hot water handle
• Cold water handle
• Red line (Hot water)
• Blue line (Cold water)
• Motor for temp-display
• Tee hoses
• Gravity hammer
• Rubber gaskets (x3)
• Metal gaskets (x3)
• Mounting nuts (x3)
• Screws (x6)
• Screwdriver

Step-by-Step: How to Install a Widespread Bathroom Faucet Like a Pro

Step 1: Install the Faucet and Handles

• Place the faucet body into the hole on your countertop.
• Insert the handles: hot water on the left, cold water on the right.

Step 2: Install Gaskets and Nuts

• Add a rubber gasket under each handle and faucet, followed by a metal gasket.
• Tighten with mounting nuts under the countertop.

Step 3: Fasten the Screws

• Secure the faucet and handles by tightening the screws with a screwdriver.

Step 4: Connect the Motor and Tee Hoses

• Attach the motor for the temp display to the cables.
• Connect the tee hoses to both hot and cold water lines.

Step 5: Connect the Water Supply

• Attach the red line to the hot water supply and the blue line to the cold water supply.

Step 6: Attach the Gravity Ball

• Slide the gravity ball onto the pull-out hose, securing it to the faucet.

Step 7: Turn on the Water and Check for Leaks

• Test the faucet by turning on the water.
• Check for leaks and tighten connections if needed.

FAQs

1. Can I install this without any experience?
   Yes! This guide makes it easy for beginners.
2. How long does it take to install?
   Around 1-2 hours.
3. What if I spot a leak?
   Tighten any loose connections, especially around the hoses.

Conclusion

Installing a widespread bathroom faucet like a pro is totally doable, even if you're new to DIY! Just follow these simple steps, and you’ll have a shiny new faucet up and running in no time.